OMRON R88M-G Servo Motor Series

OMRON R88M-G Servo Motor Series

Category: Omron

Specifications
Details

A wide range of compact servomotors to meet all application needs

Features:
  • Peak torque 300% of continuous torque during 3 seconds or more depending on model
  • Servomotors supported by SmartStep2, G-Series and Accurax G5 servo drives
  • Cylindrical and flat servomotors types are available
  • Encoder accuracy of 10,000 step/rev as standard and 17-bit ABS encoder as optional
  • IP65 as standard and shaft oil seal available
  • Motors with brake as option
  • Ratings: 230 VAC single-phase 50 W to 1.5 kW (rated torque from 0.16 to 8.62 Nm)

Specifications:
Item Specifications
 
Operating ambient temperature and humidity 0 to 55 °C, 90% RH max. (with no condensation)
Storage ambient temperature and humidity 20 to 65 °C, 90% RH max. (with no condensation)
Operating and storage atmosphere No corrosive gases
Vibration resistance *1 Smaller of either 10 to 60 Hz with double amplitude of 0.1 mm or
acceleration of 5.88 m/s2 max. in X, Y, and Z directions
Impact resistance Acceleration of 19.6 m/s2 max. 2 times each in X, Y, and Z directions
Insulation resistance Between power supply/power line terminals and frame ground: 0.5 MΩ.
min. (at 500 VDC)
Dielectric strength Between power supply/power line terminals and frame ground: 1,500 VAC for 1 min at 50/60Hz
Protective structure Built into panel (IP10).
International standard EU Directives and
UK legislation
EMC EN 55011 class A group 1
EN 61000-6-2, IEC 61000-4-2/-3/-4/-5/-6/-11
Low Voltage EN61800-5-1
UL standards UL 1004-1/-6
CSA standards CSA C22.2 No.100 (with cUR mark)
Korean Radio
Regulations (KC)
Certified

 

View more about OMRON R88M-G Servo Motor Series on main site